- *Depending on temperature and relative humidity.
- **In the event of a fire, EPS thermal insulation can prevent the spread of fire, but it does not constitute a fire barrier.
Review site · Imported datasheets are drafts and have not yet been approved.
Technical datasheet
WD 150 R
Minerally bound levelling fill for increased loads
Product
Notice
Source review note: The original (03.2023) uses inconsistent footnote markers: *** for reaction to fire and ** for “approx. 2 days”, but only * and ** are explained. Source values reproduced unchanged; the footnote references require technical clarification.
Data
Technical values
| Property | Symbol | Value | Unit |
|---|---|---|---|
| 90% fractile value of thermal conductivity (dry) | λ10 dry, 90/90 | 0.060 | W/mK |
| Bulk density of EPS dry mortar | LD | 138 | kg/m³ |
| Density of fresh mortar | FMD | 200 | kg/m³ |
| Dry bulk density | DMD | 180 | kg/m³ |
| Compressive stress at 10 % deformation | CS (10)120 | 120 | kPa |
| Water vapour diffusion resistance | µ | 6 | — |
| Reaction to fire according to EUROCLASS[***] | — | E | — |
| Type and particle size group of EPS aggregate | — | 0 - 8 R | — |
| Water addition per m³ | — | 55 | L |
| Live loadAt 10 cm | — | 20 | kN/m² |
| Working timeOpen time, 20°/60 % RH | — | min. 40 | min |
| Processing temperature min/max | — | +5° / +35° | C |
| Ready for covering after (CM measurement) | — | ≤ 15 | CM-% |
| At installation thickness up to 200 mm23°C / 50 % RH[**] | — | approx. 2 | days |
Product certificates
Footnotes
- *Depending on temperature and relative humidity.
- **In the event of a fire, EPS thermal insulation can prevent the spread of fire, but it does not constitute a fire barrier.