ThermoWhite® · Product knowledge
Product datasheets
Technical datasheets for ThermoWhite® system products, with specifications, charts and product certificates.
Search datasheetsReview site · Imported datasheets are drafts and have not yet been approved.
20 / 20 datasheets
Compound
White Portland cement with mineral fillers according to DIN EN 197-1 for producing bound insulating and levelling fills
2 mm hollow-chamber folding tacker panel made of PP
ThermoWhite® 2 mm hollow-chamber folding tacker panel for installation on thermal and impact sound insulation and levelling fills. Underfloor heating pipes are secured using tacker staples.
PE adhesive tape
ThermoWhite® PE adhesive tape
PE 3/300 RS
ThermoWhite® Gefitas® PE 3/300 RS, certified, radon-resistant waterproofing against rising ground moisture
PE 5/300 acoustic underlay
5 mm impact sound insulation foam laminated with a vapour control layer and self-adhesive strips
Recycled EPS
Recycled EPS granules for producing bound EPS fills and for use as filling material.
Roll-EPS T1000
Impact sound and thermal insulation board according to ÖNORM B 6000 / EN 13163:2012. EPS insulation board with metallised film, including a grid and adhesive strips (up to 1000 kg/m² total load).
Roll-EPS T650
Impact sound and thermal insulation board according to ÖNORM B 6000 / EN 13163:2012. EPS insulation board with metallised film, including a grid and adhesive strips (up to 650 kg/m² total load).
SD140 vapour control layer
0.2 mm LDPE flat film with durable watertightness
SpeedKorn
Mineral binder for eco-friendly crushed aggregate fill in the Speed version
SpeedUp
SpeedUp is an accelerator for ThermoWhite® thermal insulation products.
SpeedUp PUMPE
The SpeedUp pump is a mechanical dosing pump for liquids.
WD 100 R
Minerally bound thermal and/or impact sound insulation for normal loads.
WD 130 R
Minerally bound thermal insulation fill for increased loads.
WD 150 R
Minerally bound levelling fill for increased loads
WD 170 R A2
Minerally bound thermal and/or impact sound insulation for high loads
WD 50 R
Minerally bound thermal insulation fill for blown-in insulation (e.g. in timber joist ceilings, between roof rafters, etc.)
WD 70 R (R/N)
Minerally bound thermal and/or impact sound insulation for normal loads.
BEPS WD 70 R (R/N) PREMIUM
Minerally bound thermal and/or impact sound insulation for normal loads.
Whiteperl® 100
White newly expanded EPS granules for producing bound EPS fills and for use as filling material.
No matching datasheets found.